Certificate Management REST Interface

ENTERPRISE EDITION This is an EJBCA Enterprise Edition (EE) feature.

API Overview

EJBCA Certificate Management REST API contains endpoints intended for integration, in regards of certificate management using RESTful Web Services. This allows for easy integration, and lightweight HTTP interaction for the most crucial parts of EJBCA.

The scope of the API is limited in relation to the full set of features provided by EJBCA and provides functionality such as certificate request, enrollment, revocation and more. For a full description of the functionality provided, see Resources.

REST API Reference

Each EJBCA release is bundled with an auto-generated REST API reference available on the URL https://localhost:8442/ejbca/doc/rest/ if deployed or here [external link] online.

images/download/attachments/16231537/rest_doc_screenshot.png

Swagger UI

Swagger UI allows you to visualize and interact with the API’s resources. The Swagger UI playground is available in your browser on the URL https://localhost:8443/ ejbca/swagger-ui (use port 8443 since the REST API uses client certificate authentication)

images/download/attachments/16231537/swagger_screenshot.png

Swagger UI is only available if you build EJBCA in non-production mode, i.e. with ejbca.productionmode=false set in conf/ejbca.properties

The Swagger UI will only be available if REST is activated as a protocol (see below).

Getting Started

The EJBCA Certificate Management REST API is disabled by default. To enable the service, go to Administrator Web > System Configuration > Protocol Configuration and select Enable for REST.

images/download/attachments/16231537/Screen_Shot_2018-07-04_at_17.25.15.png

Integrating with the REST API and consuming the response can be done with any tool of choice. For basic GET requests, any web browser is sufficient and for improved integration, a REST library or similar tool is recommended.

The following shows an example of a basic request:

GET https://localhost:8443/ejbca/ejbca-rest-api/v1/certificate/status

Resulting in the following JSON response. Note that version and revision may vary.

{
"status":"OK",
"version":"1.0",
"revision":"ALPHA"
}

You can access the URL above using for example cURL, your browser, or any other tool. Note that the REST API requires client certificate authentication, see Authentication.

Integrating with the REST API

Requests to the API are submitted using RESTful URLs with the standard HTTP methods: GET, POST, PUT. Additionally, some endpoints accept a JSON request body. Put together, each request consists of: HTTP method, endpoint URL, and (for some endpoints) a request body. Some endpoints require you to include a HTTP method header:

Content-Type: application/json

Generally, responses consist of an HTTP header including an RFC 2616 status code, and an application/json response body. For information on exceptions, see Responses.

In case of an error, the response body contains an appropriate error message describing the event.

Resources

The certificate management REST API provides two base resource URLs:

/ejbca/ejbca-rest-api/v1/ca/
/ejbca/ejbca-rest-api/v1/certificate/

Each resource provides endpoints of interaction. Endpoints under the /ca/ resource allow retrieving CA certificates, CRLs, and so on. The /certificate/ resource handles certificate enrollment, revocation and other workflows related to management of certificates.

For a full set of all endpoints, required input, responses and other endpoint descriptions, see REST API Reference or try it out in Swagger UI.

Requests

Each endpoint URL is built in the same way by the following structure:

https://[DOMAIN_NAME]:[PORT]/ejbca/ejbca-rest-api/[API_VERSION]/[RESOURCE]/[IDENTIFIER]/[OPERATION]?[QUERY_PARAM]

Explanation

  • DOMAIN_NAME: Domain name of the EJBCA instance, for example: localhost.

  • PORT: Secure port of the EJBCA instance, for example: 8443.

  • API_VERSION: Version of the REST API, for example: v1.

  • RESOURCE: One of the two base resources: /ca/ or /certificate/.

  • IDENTIFIER: Identifier of the entity to perform the operation on. This might be a Subject DN, serial number or both combined. A composite identifier could look like .../{issuer_dn}/{certificate_serial_number_hex}/revocationstatus.

  • OPERATION: The operation to perform, for example: /revocationstatus.

  • QUERY_PARAM: HTTP query parameters. Some endpoints accept query parameters rather than a JSON body. For example .../revoke?reason=KEY_COMPROMISE.

Note that not all endpoints require the identifier or query parameters. For example, the following is not specific for an entity and does not accept an identifier:

GET https://localhost:8443/ejbca/ejbca-rest-api/v1/ca/status

Methods

Each request requires a specified HTTP method. The expected method for each endpoint can be seen in REST API Reference or in Swagger UI.

In general, the method used corresponds to the expected state change performed.

Method

Description

Example

GET

Used only to read data and not change it.

.../{issuer_dn}/{certificate_serial_number_hex}/revocationstatus

PUT

Used in operations which updates some entity state.

.../{issuer_dn}/{certificate_serial_number_hex}/revoke

POST

Used in operations which creates some entity.

.../enrollkeystore

Request Body

As mentioned, some endpoints accept a request body containing the desired input data. Request bodies must only contain JSON formatted data and the header Content-Type: application/json must be set in the request in order for the request to be accepted. All input fields (not values) must be snake_case formatted, e.g. "key_alg" rather than "keyAlg" or "key alg".

The following example shows a request to enroll a keystore (using cURL):

curl -X POST -k -H 'Content-Type: application/json' -i 'https://localhost:8443/ejbca/ejbca-rest-api/v1/certificate/enrollkeystore' --data '{
"username":"testUser",
"password":"foo123",
"key_alg":"RSA",
"key_spec":"2048"
}'

Responses

While integrating with the REST API, the most relevant information in the response is the status-line (HTTP status code), Content-Type header, and the response body.

Status Codes

Any response code within the range of 2xx - 3xx may be considered successful. This means that the server has accepted the request and sent an appropriate response. The typical response code from a GET request would be 200 - OK. When the operation requires an approval by another administrator, the response will be 201 - Accepted, meaning that the request has been accepted successfully and is awaiting approval.

Response codes in the range 4xx - 5xx should be considered errors. It may be an authentication failure, conflict or a general server error. For example, requesting an operation not allowed using your specific client certificate will generate 403 - Unauthorized, most likely followed by some response message in the response body.

For a complete list of codes which may occur while interacting with the API, see Status Codes.

Response Body

The content type of the response can be determined by the Content-Type header and most endpoints will always return application/json. Exceptions include for example calling .../ca/{issuer_dn}/certificate/download which returns a byte streamed .pem certificate. In this case the wildcard header */* is used. All requests, regardless of response code, which reach the server will retrieve a response body. Any response to a successful request will contain a body including the requested information, for example:

curl -X GET -k -i 'https://localhost:8443/ejbca/ejbca-rest-api/v1/certificate/CN%3DManagementCA%2CO%3DEJBCA%20Sample%2CC%3DSE/4b0b0ceb7a8e5f1f/revocationstatus'

Returns the following JSON body (given that the certificate is found):

{
"issuer_dn": "CN=ManagementCA,O=EJBCA Sample,C=SE",
"serial_number": "4b0b0ceb7a8e5f1f",
"revocation_reason": "KEY_COMPROMISE",
"revocation_date": "2018-06-27T08:07:52Z",
"revoked": true
}

In the event of an error, a response body containing the status code (in addition to the header), and an appropriate error message is returned.

For example, if the request above was done for a CA which does not exist, the client could expect a response like:

{
"error_code": 404,
"error_message": "CA 'CN=NonExistingCA,O=EJBCA Sample,C=SE' does not exist."
}

If a completely unexpected error occurs, the server will respond with 500 - General failure. If this occurs, verify the content of the request and next require that the CA Administrator checks the server log.

Authentication

The REST API requires client certificate authentication from administrators just as the Admin GUI does. If you have a working Admin GUI client certificate, you should also be able to use it for the REST API. How the certificate is passed with the request depends on your integration environment. To verify server response and authentication, attempt accessing the API through any web browser using your client certificate:

https://[DOMAIN_NAME]:[PORT]/ejbca/ejbca-rest-api/v1/ca/version

You can also use cURL or a similar tool by specifying --cert and --key.

If no certificate or an invalid certificate is provided, you'll most likely be presented with a "Bad certificate" error. However, if an attempt is made to request a resource above the privileges of a valid certificate, the response will contain a JSON formatted response body with the status code 403 - Unauthorized followed by an appropriate response message. For more information, see Status Codes.

Debugging REST API

By default EJBCA logs basic information about incoming requests and INFO level.

The following info is logged in INFO logging level:

  • remote address

  • "X-Forwarded-For" header value

Example:

13:31:07,976 INFO [org.ejbca.ui.web.rest.api.config.RestLoggingFilter] (default task-10) GET https://localhost:8443/ejbca/ejbca-rest-api/v1/ca/CN=Management%20CA,O=PK,C=SE/certificate/download received from 127.0.0.1 X-Forwarded-For: null

It is also possible to make EJBCA log the complete requests and responses at TRACE level.

The following info is logged in TRACE level:

  • request and response

  • time taken per request, i.e. endtime - starttime

As enabling TRACE logging globally, for all of EJBCA, may result in excessive logging, it is possible to enable it for the RestLoggingFilter only. On JBoss/WildFly this is done with simple commands in the jboss-cli:

/subsystem=logging/logger=org.ejbca.ui.web.rest.api.config:add
/subsystem=logging/logger=org.ejbca.ui.web.rest.api.config:write-attribute(name=level, value=TRACE)

Example TRACE logging for a simple request is:

curl -X GET "https://localhost:8443/ejbca/ejbca-rest-api/v1/ca/CN=Management%20CA,O=PK,C=SE/certificate/download" --insecure --cert cert-superadmin.pem --key key-superadmin.pem
2018-08-07 13:31:08,038 TRACE [org.ejbca.ui.web.rest.api.config.RestLoggingFilter] (default task-10) GET https://localhost:8443/ejbca/ejbca-rest-api/v1/ca/CN=Management%20CA,O=PK,C=SE/certificate/download received from 127.0.0.1 X-Forwarded-For: null
Request headers:
Accept: */*
User-Agent: curl/7.47.0
Host: localhost:8443
Request data:
Response data:
Subject: CN=Management CA,O=PK,C=SE
Issuer: CN=Management CA,O=PK,C=SE
-----BEGIN CERTIFICATE-----
MIIDTzCCAjegAwIBAgIIbbifeqpPKLcwDQYJKoZIhvcNAQELBQAwNTEWMBQGA1UE
<snip>
xdd9ycYOyym2nvM+SPydHlK8dAqwwXzICFFOCRADsQNakVU=
-----END CERTIFICATE-----
 
Time taken: 62ms

Status Codes

API status codes are exposed in standard HTTP response codes and JSON formatted messages. For example, the following example shows an HTTP 403 error:

{
"error_code": 403,
"error_message": "Not authorized to resource /administrator."
}

The response code will also be available in the HTTP response status-line. The following table describes status codes which may be "expected" responses from the REST API and a few possible reasons.

HTTP Status Code

General Description

EJBCA REST API Context

200

OK

Successful HTTP request, expect a proper response body. Typically received from a successful GET request.

201

Created

Successful HTTP request. Some entity has been created, e.g. certificate enrolled. Typically received after a successful POST request.

202

Accepted

Request accepted by server but awaiting processing. Most likely waiting for administrator approval.

400

Bad Request

Most likely missing or invalid input parameters / JSON body in the request.

403

Forbidden

Request accepted but operation is refused due to insufficient privileges, disabled features etc.

404

Not Found

Requested entity was not found by EJBCA. Could occur if the input refers to a non-existing entity, such as a user or a CA.

409

Conflict

Conflict occurred while processing request, e.g. trying to revoke an already revoked certificate.

413

Payload Too Large

The request is larger than the server is willing to process. Should not occur while using the API as intended.

422

Unprocessable Entity

Well-formed request but unable to process due to e.g. semantic errors. Could occur in case of invalid key algorithm, validity etc.

500

Internal Server Error

Unexpected error while calling the API. For additional details, refer to the server log (CA Administrator).

503

Service Unavailable

Possible reason could be that the CA is offline, CT log is unavailable etc.